A true original, this handmade ceramic Sunflower & Butterfly Cremation Urn is a work of art which comes ready to be mounted on the walls of your home. Thinking outside the box, the husband and wife team of sculpture artists who create these work to change the notion of the typical urn form, by creating art which out-of-the-ordinary and down-to-earth. These kiln-fired sculptural urns are honest in subject, but discreet in function.
The interior of the sunflower urn is accessed via a panel built in to the backside of the piece. The closure hatch is cut from the ceramic and, after placing the remains into the urn inside the plastic bag in which they come, should be reaffixed using a permanent adhesive such as silicone or super glue. This urn has a maximum capacity of 115 cubic inches.
While you can place the Sunflower & Butterfly Cremation Urn wherever you choose, it was designed to be hung on the walls of your home. The urn was constructed with a high-temperature wire hanger kiln-fired within the ceramic material which is tested to hold weights of over 20 lbs (the sunflower urn itself weighs roughly 7.2 lbs, with remains will weigh between 10-13 lbs).
Please note: As these ceramic art deco urns are individually handmade, each piece will be distinct. You may find slight, very minor variations from what is shown, this is normal and highlights the unique beauty of each piece.
Handmade in the USA
Made to order
18”w x 18”h x 6.5”d
115 cubic inch capacity
Approx weight: 7.2 lbs
Rear opening panel
Wall mountable, includes hanger
Hand crafted using earthenware ceramic
Hand painted with oxide washes, acrylic & metallic wax finish
The concealed inurnment area can hold up to 115 cubic inches of remains
This is roughly equivalent of 115 lbs of healthy body weight
For more information on sizing and estimating cubic inches, see here
Shipping & delivery
Made to order within 6 weeks
RUSH order available $150 for 2 weeks
Free standard ground shipping
Ground time in transit varies by destination; usually 2-7 business days
Rush shipping is available, please contact us at 877-900-5309
Wall mounting details
This wall-mounted Sunflower urn is crafted with a high-temperature wire hanger that is kiln-fired into the ceramic piece. Please use care when choosing a wall hanging location. It is recommended that you provide an adequate sized (1-2”) screw driven into a wall stud. If the desired location for the urn is not convenient where a stud falls, be sure to use a drywall hanger. Hardware and home improvement stores have drywall hangers with various weight ratings, we advise using a minimum 20 lb. hanger even though the urn with remains will be about 12 lbs (roughly). If using a drywall hanger, carefully read the instructions provided by the manufacturer. We cannot be responsible for damage caused by failure to properly hang the ceramic urn with the greatest of care.