Skip to content
Free ground shipping* on orders over $100 USD
Free ground shipping* on orders over $100 USD
Full Rectangle Photo Framed Wooden Pet Urn - maple

Full Rectangle Photo Framed Wooden Pet Urn

SKU
$129.00 - $179.00
$129.00
$129.00 - $179.00
$129.00

This is a beautifully handcrafted, high-quality memorial made with families in mind. This urn features a photo-framed rectangle cutout to place a photo of your pet companion. The rectangle cutout takes up most of the front panel space. This urn can only be engraved on top. Crafted from durable hardwood and finished with a clear coat that enhances its warm, natural grain, this urn offers an elegant and lasting tribute to your beloved pet. It also features integrated felt feet to ensure stability and protect your display surfaces from scratches.

Details

  • Handmade in the USA
  • Choose from: Cherry, Maple, Oak, or Walnut hardwoods
  • Variety of Custom Engraving Options
  • Felt feet to maintain stability and safeguard surfaces from scratches
  • Choose from 4 different sizes

Sizing

Small: 30 Cubic Inches, 6.5" L x 4.6" W x 4.3" H
Medium: 70 Cubic Inches, 7.7" L x 5.3" W x 5.2" H
Large: 120 Cubic Inches, 8.8" L x 5.75" W x 6" H

Engraving Details

There are no engraving proof layouts available. What you type is what will be engraved, including uppercase and lowercase letters, unless the font does not have both options.

Top Engraving Details:
Centered on the top only, up to 4 lines of 37 Characters per line, lines are vertically stacked. No engraving can be done on the front of the urn.

Access the interior and photo area:

Part 1: Accessing the Urn & Inserting Cremains

  1. Remove the Frame: Slide the picture frame to the left until the right side is exposed, and lift it out.

  2. Clear the Area: Remove the directions and the plexiglass.

  3. Insert Cremains: The hardboard panel secured by four screws is the access point for the cremains. Unscrew and remove the panel, insert the cremains, and then screw the hardboard panel firmly back into place.

Part 2: Inserting the Picture & Securing the Frame

  1. Place Components: Lay the picture on the hardboard panel, followed by the clear plexiglass (peel off the blue protective film first).

  2. Reinstall Frame: Insert the left edge of the frame under the opening's lip, lay the frame flat, and gently wiggle it until it locks into the internal grooves on both sides.

Note: The picture is held in place by the pressure of the components and does not require tape.

Shipping 

  • Made to order in 2 weeks 
  • Only ships UPS ground; time in transit varies per your location (1-6 business days)
  • No expedited shipping or production available